Product Details
MegaAVR-Dev - Development Board
The MegaAVR-Dev development board is designed for prototyping and laboratory use. This board supports the AT90S8535, Mega8535, Mega16, Mega163, Mega32, or the Mega323 in a 40-pin DIP package. Features: - Comes Standard with an ATMega32-8PC processor
- Comes programmed with a boot strap loader! No other programming hardware is required! Just an RS232 cable to your PC and the AVRBL Boot Loader Windows application.
- USB through a female Type B USB Downstream connector.
- - or -
- RS232 through a 9-Pin D-Shell as well as screw terminals and a jumper header.
- Up to 32K of In-System Programmable FLASH memory with up to 1K of EEPROM and up to 1K of Internal RAM (depending on processor selection).
- Eight, 10 bit, Analog Inputs, using either internal or user supplied reference.
- 9 I/O controlled LEDs, 8 of which are jumper selectable.
- 32KHz watch crystal for on-board Real-Time operations.
- A universal clock socket allows for canned oscillators , as well as a variety of crystals, ceramic resonators, and passive terminations.
- 0.1" centered headers provide for simple connection to the processor special function pins and I/O.
- 10-pin, polarized, ISP and JTAG connections are provided for in-system programming and debugging. MegaAVRs may also be programmed through RS232 using an appropriate boot loader application. (The standard 10-pin ISP connection is compatible with the TheCableAVR in-system programmer. See the ISP Header Document.)
- On-board regulation allows for power inputs from 8-38VDC with an LED power indicator.
- Termination is provided for 5VDC output at 250ma.
- More info:
MegaAVR-Dev.pdf - User's Guide for the MegaAVR-Dev Development Board
CodeVision C Example - M16 - Sample CodeVision project using the Mega16
CodeVision C Example - M32 - Sample CodeVision project using the Mega32
AVRBL Windows Application - Windows application for downloading programs to the MegaAVR-Dev - AT90S8535
- ATMega8535
- ATmega16
- ATmega32 *Installed
|
